en to en_GB translation catalogue (68 entries)

en: %1$sManage Licenses%2$s
en_GB: %1$sManage Licences%2$s

en: - On some budget hosts scanning over 30k files can lead to timeout/gateway issues. Consider scanning only your main WordPress site and avoid trying to backup other external directories.
en_GB: - On some budget hosts scanning over 30k files can lead to timeout/gateway issues. Consider scanning only your main WordPress site and avoid trying to back up other external directories.

en: - Symbolic link recursion can cause timeouts.  Ask your server admin if any are present in the scan path.  If they are add the full path as a filter and try running the scan again.
en_GB: - Symbolic link recursion can cause timeouts.  Ask your server admin if any are present in the scan path.  If they are, add the full path as a filter and try running the scan again.

en: 4. For table name case sensitivity issues either rename the table with lower case characters or be prepared to work with the %1$s system variable setting.
en_GB: 4. For table name case sensitivity issues, either rename the table with lowercase characters or be prepared to work with the %1$s system variable setting.

en: <b>Need Help?</b>  Please check out these resources first:<ul>
en_GB: <b>Need Help?</b> Please check out these resources first:<ul>

en: <b>Packages New » 1 Setup</b> <br/>The setup step allows for optional filtered directory paths, files, file extensions and database tables.  To filter specific system files, click the 'Enable File Filters' checkbox and add the full path of the file or directory, followed by a semicolon.  For a file extension add the name (i.e. 'zip') followed by a semicolon. <br/><br/>To exclude a database table, check the box labeled 'Enable Table Filters' and check the table name to exclude. To include only a copy of your database in the archive file check the box labeled 'Archive Only the Database'.  The installer.php file can optionally be pre-filled with data at install time but is not required.  <br/><br/>
en_GB: <b>Packages New » 1 Setup</b> <br/>The setup step allows for optional filtered directory paths, files, file extensions and database tables.  To filter specific system files, click the 'Enable File Filters' tickbox and add the full path of the file or directory, followed by a semicolon.  For a file extension add the name (i.e. 'zip') followed by a semicolon. <br/><br/>To exclude a database table, tick the box labeled 'Enable Table Filters' and tick the table name to exclude. To include only a copy of your database in the archive file tick the box labeled 'Archive Only the Database'.  The installer.php file can optionally be pre-filled with data at install time but is not required.  <br/><br/>

en: <b>Packages » Details</b> <br/>The details view will give you a full break-down of the package including any errors that may have occured during the install. <br/><br/>
en_GB: <b>Packages » Details</b> <br/>The details view will give you a full break-down of the package including any errors that may have occurred during the install. <br/><br/>

en: <i class="fa fa-exclamation-triangle fa-sm"></i> The custom path provided is not recognized as a valid mysqldump file:<br/>
en_GB: <i class="fa fa-exclamation-triangle fa-sm"></i> The custom path provided is not recognised as a valid mysqldump file:<br/>

en: A message will show indicated that that a scan depth has been reached. If you have issues with the package scanner (step 2) during the build process then try to add The paths below to your file filters to allow the scanner to finish.
en_GB: A message will show indicating that a scan depth has been reached. If you have issues with the package scanner (step 2) during the build process, then try to add the paths below to your file filters to allow the scanner to finish.

en: A two-part install minimizes server load and can avoid I/O and CPU issues encountered on some budget hosts. With this procedure you simply build a 'database-only' archive, manually move the website files, and then run the installer to complete the process.
en_GB: A two-part install minimises server load and can avoid I/O and CPU issues encountered on some budget hosts. With this procedure you simply build a 'database-only' archive, manually move the website files, and then run the installer to complete the process.

en: Add a custom path if the path to mysqldump is not properly detected.   For all paths use a forward slash as the path seperator.  On Linux systems use mysqldump for Windows systems use mysqldump.exe.  If the path tried does not work please contact your hosting provider for details on the correct path.
en_GB: Add a custom path if the path to mysqldump is not properly detected. For all paths, use a forward slash as the path separator. On Linux systems use mysqldump, for Windows systems use mysqldump.exe. If the path tried does not work, please contact your hosting provider for details on the correct path.

en: An "Addon Site" is a separate WordPress site(s) residing in subdirectories within this site. If you confirm these to be separate sites, then it is recommended that you exclude them by checking the corresponding boxes below and clicking the 'Add Filters & Rescan' button.  To backup the other sites install the plugin on the sites needing to be backed-up.
en_GB: An "Add-on Site" is a separate WordPress site(s) residing in subdirectories within this site. If you confirm these to be separate sites, then it is recommended that you exclude them by ticking the corresponding boxes below and clicking the 'Add Filters & Rescan' button.  To back up the other sites install the plugin on the sites needing to be backed-up.

en: An unauthorized security request was made to this page. Please try again!
en_GB: An unauthorised security request was made to this page. Please try again!

en: At least one or more checkboxes was checked in "Quick Filters".
en_GB: At least one or more tickboxes were ticked in "Quick Filters".

en: Branding is a way to customize the installer look and feel.  With branding you can create multiple brands of installers.
en_GB: Branding is a way to customise the installer look and feel.  With branding you can create multiple brands of installers.

en: Can't find Scanfile %s. Please ensure there no non-English characters in the package or schedule name.
en_GB: Can't find Scanfile %s. Please ensure there are no non-English characters in the package or schedule name.

en: Check this option if other plugins/themes CSS files are conflicting with Duplicator.
en_GB: Tick this option if other plugins/themes CSS files are conflicting with Duplicator.

en: Check this option if other plugins/themes JavaScript files are conflicting with Duplicator.
en_GB: Tick this option if other plugins/themes JavaScript files are conflicting with Duplicator.

en: Click on "Resolve This" button to fix the JSON settings.
en_GB: Click on the "Resolve This" button to fix the JSON settings.

en: Clicking on the 'Remove Installation Files' button will attempt to remove the installer files used by Duplicator.  These files should not be left on production systems for security reasons. Below are the files that should be removed.
en_GB: Clicking on the 'Remove Installation Files' button will attempt to remove the installer files used by Duplicator. These files should not be left on production systems for security reasons. Below are the files that should be removed.

en: Creates a archive format (archive.zip).
en_GB: Creates an archive format (archive.zip).

en: During the install safe mode was enabled deactivating all plugins.<br/> Please be sure to
en_GB: During the install, safe mode was enabled deactivating all plugins.<br/> Please be sure to

en: ERROR: Archive is not valid zip archive.
en_GB: ERROR: Archive is not a valid zip archive.

en: ERROR: Can't find Scanfile %s. Please ensure there no non-English characters in the package or schedule name.
en_GB: ERROR: can't find Scanfile %s. Please ensure there no non-English characters in the package or schedule name.

en: ERROR: Cannot open created archive. Error code = %1$s
en_GB: ERROR: cannot open created archive. Error code = %1$s

en: FAQ
en_GB: FAQs

en: For example, you could  filter out the  "/wp-content/uploads/" folder to create the package then move the files from that directory over manually.  If this work-flow is not desired or does not work please check-out the other options below.
en_GB: For example, you could  filter out the  "/wp-content/uploads/" folder to create the package then move the files from that directory over manually.  If this work-flow is not desired or does not work please check out the other options below.

en: If the installer files do not successfully get removed with this action, then they WILL need to be removed manually through your hosts control panel  or FTP.  Please remove all installer files to avoid any security issues on this site.  For more details please visit the FAQ link <a href="https://snapcreek.com/duplicator/docs/faqs-tech/#faq-installer-295-q" target="_blank">Which files need to be removed after an install?</a>
en_GB: If the installer files do not successfully get removed with this action, then they WILL need to be removed manually through your hosts control panel or FTP.  Please remove all installer files to avoid any security issues on this site.  For more details please visit the FAQ link <a href="https://snapcreek.com/duplicator/docs/faqs-tech/#faq-installer-295-q" target="_blank">Which files need to be removed after an install?</a>

en: If the value shows dynamic then this means its possible for PHP to run longer than the default.  If the value is fixed then PHP will not be allowed to run longer than the default.
en_GB: If the value shows dynamic, then this means it's possible for PHP to run longer than the default. If the value is fixed, then PHP will not be allowed to run longer than the default.

en: If there is a recursive loop on your system then the process has a built in check to stop after a large set of files and directories have been scanned.
en_GB: If there is a recursive loop on your system, then the process has a built-in check to stop after a large set of files and directories have been scanned.

en: Initializing Please Wait...
en_GB: Initialising Please Wait...

en: Install an individual subsite from a Multisite as a standalone site.  This feature is only available with Business or Gold licenses.
en_GB: Install an individual subsite from a Multisite as a standalone site.  This feature is only available with Business or Gold licences.

en: Installer contains option to regenerate salts in the wp-config.php file.  This feature is only available with Freelancer, Business or Gold licenses.
en_GB: Installer contains option to regenerate salts in the wp-config.php file.  This feature is only available with Freelancer, Business or Gold licences.

en: Kindly share what didn't work so we can fix it in future updates...
en_GB: Kindly share what didn't work, so we can fix it in future updates...

en: License
en_GB: Licence

en: License Key
en_GB: Licence Key

en: Migrate and backup a copy of your WordPress files and database. Duplicate and move a site from one location to another quickly.
en_GB: Migrate and back up a copy of your WordPress files and database. Duplicate and move a site from one location to another quickly.

en: Migrate large, multi-gig sites with
en_GB: Migrate large, multi-GB sites with

en: Multi-Threaded
en_GB: Multi Threaded

en: None of the reserved files where found from a previous install.  This means you are clear to create a new package.
en_GB: None of the reserved files were found from a previous install.  This means you are clear to create a new package.

en: Package build appears stuck so marking package as failed. Is the Max Worker Time set too high?.
en_GB: Package build appears stuck, so marking package as failed. Is the Max Worker Time set too high?

en: Please tell us the reason so we can improve it.
en_GB: Please tell us the reason, so we can improve it.

en: Please tell us what is not clear so that we can improve it.
en_GB: Please tell us what is not clear, so that we can improve it.

en: Professional Users: Please note that if you have already purchased the Professional version it is a separate plugin that you download and install.  You can download the Professional version  from the email sent after your purchase or click on the 'Manage Licenses' link above to download the plugin from your snapcreek.com dashboard.
en_GB: Professional Users: Please note that if you have already purchased the Professional version it is a separate plugin that you download and install.  You can download the Professional version  from the email sent after your purchase or click on the 'Manage Licences' link above to download the plugin from your snapcreek.com dashboard.

en: Reserved Duplicator installation files have been detected in the root directory.  Please delete these installation files to avoid security issues. <br/> Go to:Duplicator > Tools > Information >Stored Data and click the "Remove Installation Files" button
en_GB: Reserved Duplicator installation files have been detected in the root directory. Please delete these installation files to avoid security issues. <br/> Go to: Duplicator > Tools > Information >Stored Data and click the "Remove Installation Files" button

en: Resetting settings, Please Wait...
en_GB: Resetting settings, please wait...

en: Retry Build With Filters
en_GB: Retry build with filters

en: Send & Deactivate
en_GB: Send and Deactivate

en: Separate all filters by semicolon
en_GB: Separate all filters by semi-colon

en: Single-Threaded
en_GB: Single Threaded

en: Skip & Deactivate
en_GB: Skip and Deactivate

en: Templates allow you to customize what you want to include in your site and store it as a re-usable profile.
en_GB: Templates allow you to customise what you want to include in your site and store it as a re-usable profile.

en: The first pass for reading files on some budget hosts maybe slow and have conflicts with strict timeout settings setup by the hosting provider.  In these cases, it is recommended to retry the build by adding file filters to larger files/directories.
en_GB: The first pass for reading files on some budget hosts may be slow and have conflicts with strict timeout settings setup by the hosting provider.  In these cases, it is recommended to retry the build by adding file filters to larger files/directories.

en: The free version of Duplicator does not require a license key.
en_GB: The free version of Duplicator does not require a licence key.

en: The total size of the site (files plus  database).
en_GB: The total size of the site (files plus database).

en: The utility will also shows how many files and directories you have in your system.  This process may take several minutes to run.
en_GB: The utility will also show how many files and directories you have in your system.  This process may take several minutes to run.

en: This message will be removed after all installer files are removed.  Installer files must be removed to maintain a secure site.  Click the link above or button below to remove all installer files and complete the migration.
en_GB: This message will be removed after all installer files are removed. Installer files must be removed to maintain a secure site. Click the link above or button below to remove all installer files and complete the migration.

en: This process will reset all packages by deleting those without a completed status, reset the active package id and perform a cleanup of the build tmp file.
en_GB: This process will reset all packages by deleting those without a completed status, reset the active package ID and perform a cleanup of the build tmp file.

en: This server does not support the PHP shell_exec or exec function which is required for mysqldump to run.
en_GB: This server does not support the PHP shell_exec or exec function, which is required for mysqldump to run.

en: This utility will help to find unreadable files and sys-links in your environment  that can lead to issues during the scan process.
en_GB: This utility will help to find unreadable files and sys-links in your environment that can lead to issues during the scan process.

en: To get past this hosts limitation consider the options below by clicking each section.
en_GB: To get past this host's limitation consider the options below by clicking each section.

en: To stop or reset this package build goto Settings > Advanced > Reset Packages
en_GB: To stop or reset this package build go to Settings > Advanced > Reset Packages

en: While it is not recommended you can still continue with the build of this package.  Please note that at install time additional manual custom configurations will need to be made to finalize this multisite migration.
en_GB: While it is not recommended you can still continue with the build of this package.  Please note that at install time additional manual custom configurations will need to be made to finalise this multisite migration.

en: [view json result report]
en_GB: [view JSON result report]

en: in-complete
en_GB: incomplete

en: repair and optimization
en_GB: repair and optimisation

en: to by-pass this requirement.
en_GB: to bypass this requirement.

en: unknow
en_GB: unknown
